Mercedes-Benz 450 SEL 6.9 (W116) specs
| Car type | 4-door saloon |
| Curb weight | 1935-1995 kg (4266-4398 lbs) |
| Dimensions | 5.06 m (199 in) long, 1.87 m (74 in) wide, 1.41 m (56 in) high |
| Wheelbase | 2.96 m (117 in) |
| Introduced | 1975 |
| Origin country | Germany |
| Gas mileage | 25.5-19.8 l/100 km (9-12 mpg US / 11-14 mpg UK) |
| Views | 24.1k |
| Submitted by | Inline 6 rules |
Performance
| 0 - 40 kph | 2.3 s |
| 0 - 60 kph | 4.0 s |
| 0 - 80 kph | 5.8 s |
| 0 - 100 kph | 7.4 s |
| 0 - 120 kph | 11.3 s |
| 0 - 140 kph | 14.4 s |
| 0 - 160 kph | 19.5 s |
| 0 - 180 kph | 25.7 s |
| 0 - 200 kph | 35.8 s |
| 1000 m | 28.8 s |
| Est. 100 - 140 kph | 6.7 s |
| Est. 100 - 200 kph | 28.0 s |
| Est. 0 - 60 mph | 7.2 s |
| Est. 1/8 mile | 11.1 s @ 77.0 mph |
| Est. 1/4 mile | 17.4 s @ 97.6 mph |
| Est. 1/2 mile | 26.9 s @ 114.3 mph |
| Top speed | 234 kph (145 mph) |
| Est. max acceleration | 0.41 g (4 m/s²) |
Powertrain specs
| Engine type | V8, n/a, 16 valves, OHC |
| Displacement | 6.8 l (417 ci / 6834 cc) |
| Power | 286 ps (282 bhp / 210 kw) @ 4250 rpm |
| Torque | 550 Nm (406 lb-ft) @ 3000 rpm |
| Power / liter | 42 ps (41 hp) |
| Power / weight | 146 ps (144 bhp) / t |
| Torque / weight | 280 Nm (206 lb-ft) / t |
| Efficiency | 13 PS per l/100 km |
| Transmission | 3 speed automatic |
| Layout | front engine, rear wheel drive |
Interior noise
| Noise @ idle | 43 dB |
| Noise @ 50 kph | 62 dB |
| Noise @ 80 kph | 65 dB |
| Noise @ 100 kph | 68 dB |
| Noise @ 160 kph | 76 dB |
| Noise @ 180 kph | 78 dB |
450 SEL 6.9 competition
Terrance Smith 2y ago
Three Speed Was from General Motors, Turbo-Hydramatic, I've driven over 70.000miles with this transmission, perfect, never let me down. Also used by Rolls-Royce
Inline 6 rules 15y ago
I don't understand why 3 speed automatics were used in cars. According to the wikipedia the first automatic transmission had 4 speed. The 1968 Mercedes W109 6.3 has 4 speed automatic and it has only 50 Nm less than this and there are 7 years between the year of introduction. If they could make a 4 speed which can handle 503 Nm in 1968 why they couldn't make a 4 speed which can handle 550 Nm in 1975?
Inline 6 rules 15y ago
I've seen that the 450 SEL 6.9 was deleted so I re-added it.
Datas come from here:
http://et.mercedes-benz-clubs.com/mediawiki/index.php/W116-450SEL6.9-Motor
